Samson SXD7000

Power Amplifier With DSP

  • ₦242,000.00


The SXD7000 Power Amplifier with DSP by Samson is for live sound reinforcement. It is used in various environments in audio applications to provide clean power for speakers such as in DJ setups, houses of worship, front of house, live stage performance and more. It features 1000W power per side at 4 Ω. This amp is designed to provide clean output with low distortion and a wide dynamic range over a frequency spectrum of 20 Hz to 20 kHz.
 
Rated Output Power Stereo Both Channels Driven:
8 Ω 700 W
4 Ω 1000 W
Signal to Noise Ratio 20 Hz to 20 kHz: >100 dB
Distortion SMPTE-IM: 0.02%
Input Sensitivity At 8 Ω Voltage Gain: 5 dBu
Voltage Gain 34 dB
Output Circuit 2-Tier Class H
Current Consumption 115 VAC:
At 1/8 Rated Power 4 Ω: 5.5 A
At 1/3 Rated Power 4 Ω: 9.2 A
At Rated Power 4 Ω, Max: 16 A
Distortion Typical @ 4 Ω:
20 Hz to 20 kHz, 10 dB Below Rated Power: 0.02 %
1 kHz, Rated Power: 1 %
Frequency Response At 8 Ω 1 W, 0/-1 dB: 20 Hz to 20 kHz
Damping Factor 400 Hz: 120
Input Impedance 20 kΩ balanced
Input Clipping Level 10 Vrms (22 dBu)
Cooling Continuously variable speed fan cooling
Connector Inputs: 2 x 3-pin XLR
2 x 1/4" (0.63 mm) TRS, balanced
Outputs: 4 x Binding post
2 x Speakon
Indicators Signal, -20 dB, 10 dB, limit, thermal
Protection Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
DSP
Display 2 x 16 character LCD
Modes Manual mode, 2 full range, mono 2-way, sub/sat, 2 subs
I/O Stereo, mono A+B dual, mono A+B link, parallel A dual, parallel A link
Digital Dynamics Function: Filter, crossover, gain offset, EQ, limiter
Digital Delay Function: Max 20 ms per channel
Digital Equalizer Function Per Channel
fO: 1/12 octave at 20 to 20 kHz
Gain: ± 12 dB
Q: 0.5 to 5.0
Presets: DJ, vocal, live sound, install, rock, dance and jazz
Setup Lock controls with code, factory reset
Dimensions (L x W x H) 19.0 x 13.0 x 3.5" (482 x 330 x 88 mm)
Weight 33 lb (15 kg)

We Also Recommend